Skip to content
CyberRemoteOur apps

CyberRemote

Support

Last updated

Contact PeaqTeq

Email contact@peaqteq.com with “CyberRemote” in the subject. Tell us your phone model, Android version, app version, the TV or streaming device model, what happened and what you expected. Do not send pairing codes or passwords.

Before you start

Connect your phone and TV to the same Wi-Fi network. Guest networks and some mesh or router settings block devices from finding each other; if a device is not found, check that client isolation is off on your router.

Apple TV

Open Devices and choose your Apple TV, then enter the code shown on the TV. If it does not appear, on the Apple TV open Settings → AirPlay and HomeKit and make sure access is allowed for devices on your network. Voice entry works when a search or text field is open on the Apple TV.

Fire TV

On the Fire TV, open Settings → My Fire TV → About and select the device name seven times to show Developer options. Then open Settings → My Fire TV → Developer options and turn on ADB debugging. In CyberRemote, add the Fire TV and approve the debugging prompt on the TV; choose Always allow to avoid repeat prompts. Find the Fire TV’s IP address under Settings → My Fire TV → About → Network.

Samsung TV

Turn on the TV, add it in Devices and choose Allow on the TV when asked. To turn the TV on from the app, keep the TV connected to the network in standby; on many models this is Settings → General → Network → Expert Settings → Power On with Mobile.

Not connecting

Make sure the TV is on and on the same network, then reopen the app. If a device changed its network address, remove it in Devices and add it again. Removing a device deletes its pairing; you will need to pair again.

Email support